Mechanical engineering: CHIP FORMATION
News Update
Loading...
Showing posts with label CHIP FORMATION. Show all posts
Showing posts with label CHIP FORMATION. Show all posts

Wednesday, December 2, 2009

CHIP FORMATION

CHIP FORMATION

There are three types of chips that are commonly produced in cutting,
- discontinuous chips
- continuous chips
- continuous with built up edge

A discontinuous chip comes off as small chunks or particles. When we get this chip it may indicate,

- brittle work material
- small rake angles
- coarse feeds and low speeds

A continuous chip looks like a long ribbon with a smooth shining surface. This chip type may indicate,

- ductile work materials
- large rake angles
- fine feeds and high speeds
- use of coolant and good chip flow

Continuous chips with a built up edge still look like a long ribbon, but the surface is no longer smooth and shining. This type of chip tends to indicate,

- high friction between work and tool causes high temperatures that will occasionally weld the chip to the tool. This will break free, but the effects is a rough cutting action.

Continuous chips, and subsequently continuous cutting action is generally desired.

Featured

[Featured][recentbylabel]

Featured

[Featured][recentbylabel]
Notification
This is just an example, you can fill it later with your own note.
Done